Bodytone plate Loaded Squat Lunge
Bodytone presents its Squat from the Solid Rock line, an elegant, simple and versatile machine that perfectly accompanies your movements in the multiple exercises you perform. The exclusive design of the Solid Rock line contributes to the creation of a machine with great biomechanical performance.
DOUBLE HOLDING
The double grip allows for the performance of multiple exercises depending on the position adopted, guiding the user to the perfect biomechanical execution, avoiding any type of injury that may occur.
DOUBLE BAR AND STORAGE
This unique model in the market, presents four loading spikes and two storage spikes. This allows the use of all types of users, from the beginner to the most expert who works with a significant weight load
DIMENSIONS174 x 156 x 87 cm
WEIGHT119 Kg
LOADING CAPACITY310 mm support brackets for 8 Bodytone discs of 20 kg per arm (up to 280 kg for training). 2 supports for storage of 4 Bodytone discs of 20 kg per side.
USER HEIGHTOur machines are designed for a very broad spectrum of users, allowing the regulation of them to adapt to different user statures, from 150 to 200 cm approximately.
STRUCTURE110×52 mm Steel pipe, 3 mm thick as per UNE EN 10219, quality s-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with low breakage rate. Cold bending process by 4-roller system to avoid deformation during the process, keeping its physical characteristics throughout the piece.
PAINTING PROCESS3 layers of paint. Steel pickling and stabilized by immersion of the parts in different degreasing solutions to ensure a perfect and complete cleaning of the base material. Antioxidant primer to ensure adquate isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy paint.
DESIGN PROCESSErgonomic and biomechanical study under our associated professional athletes. After a long design process; from the drawing of the sketch, prototypes making and tested by athletes our products are released to the market.
WELDINGPerimeter closing welding in structural points and union plates.
ASSEMBLY PROCESSES10 mm plate-against Plate system, to avoid looseness and torsion in maximum effort areas. Ergonomic and biomechanical research optimized for every exercise.
AXLES10 mm thickness plates cut by laser with another 10 mm plate for reinforcement,for a smooth movement withour looseness or torsion produced for the continouos usage or loading.
BEARINGSSFK double tapared roller bearing, allocated in closed bushing ensuring a constant direction movement.
GRIPSDouble grip to facilitate different types and angles of exercise. Double disc holder for heavier exercises. Handles in anodized aluminum, knurled favoring grip.
OTHERSPlate supports made in burnished steel, providing more stability to the machine. Turned Aluminium endings. Screw hardness 10.9. Regulation system by a single bolt made of techno polymer with 750 shear rate. 4 non-slip rubber bases.
